If you are handy, and have always wanted a wall mounted wine rack, you can easily build your own, cause this is indeed a very easy job to do.

The directions I am about to write below for a wall mounted wine rack is made by using a used kitchen cabinet. You can always get old cabinet at a garage sale, or perhaps you can use your own old one.

Here Are Some Simple Steps How To Create A Wall Mounted Wine Rack:

* Start by pulling out the door off of cabinet. Don't forget to take any brackets and shelves as well out of the cabinet.

* You will need to measure the height of the cabinet to determine how many shelves it should have.

* Use a saw to cut shelves for your wall mounted wine rack. Make a back and front for each shelf.

* To create the neck holders you will need to drill 1" holes in the center of the board. You will need to determine how many wine bottles will fit across the width of your cabinet.

* Especially for the rear, you will need to repeat step 4 by using a 4" hole cutter. This one is for the back for your wine rack.

* You can finish the shelves and cabinet by using a paint and liquor.

* When your paint and stain is dry, then it is the time for you to assemble the mounted wine rack. To mount the shelves in the front and in the back, you can use the brackets of your cabinet.

* When things is done, now it is the time to mount your wall mounted wine rack the wall.

Put your favorite wine bottle in your new wall mounted wine rack. Your friends and family will be impressed with your creation, and you'll feel proud of yourself.

Pretty soon everyone will be asking how you made such a gorgeous piece out of an old kitchen cabinet.